User`s guide

CPU32 Emulation 33
Chapter 2: Connecting the Emulation Probe to a LAN
Connecting the Emulation Probe to a LAN
3 Write down the link-level address of the emulation probe.
You will need this address if you use BOOTP to set the IP address.
The link-level address (LLA) is printed on a label above the LAN
connectors on the emulation probe. This address is configured in each
emulation probe shipped from the factory and cannot be changed.
IP Address of Emulation probe __________________________
LAN Name of Emulation Probe __________________________
Gateway Address __________________________
Link-Level Address of Emulation Probe __________________________