User`s guide

2 CPU32 Emulation
Motorola CPU32 Emulation—At a Glance
This manual describes how to set up several HP emulation products: an
emulation probe, an emulation module, and an emulation migration.
These emulators provide a low-cost way to debug embedded software
for Motorola CPU32 microprocessors. The emulator lets you use the
target processor’s built-in background debugging features, including
run control and access to registers and memory. A high-level source
debugger can use the emulator to debug code running on the target
system.
You can connect the emulator to an analysis probe or you can connect
it to a debug port on the target system through the provided target
interface module (TIM). The emulator can be controlled by a debugger
on a host computer or by the Emulation Control Interface on an
HP16600A/700A-series logic analysis system.
Emulation Probe
The emulation probe is a stand-alone emulator.