User`s guide

26 CPU32 Emulation
Chapter 1: Overview
Minimum equipment required
Minimum equipment required
The following equipment is required to use the emulation migration:
• An emulation module or emulation probe.
• A 50-pin data cable (supplied with the emulation module or probe).
• A method for connecting to the target system. An HP analysis probe
provides a debug port connector. You can also design a debug port
connector on the target system.
• A host computer such as a PC, a workstation, or an HP16600A or
HP16700A logic analysis system.
• A user interface, such as a high-level source debugger or the logic analysis
system's Emulation Control Interface.