User`s guide

24 CPU32 Emulation
Chapter 1: Overview
Emulation Module
Equipment Supplied with the Emulation Module
Minimum equipment required
The following equipment is required to use the emulation module:
A method for connecting to the target system. The HP E2480A analysis
probe provides a debug port connector. You can also design a debug
port connector on the target system (see “Designing a Target System
for the Emulator” on page 65).
• An HP 16600A or HP 16700A logic analysis system.
• A user interface, such as a high-level source debugger or the logic analysis
system’s Emulation Control Interface.