User`s guide

18 CPU32 Emulation
Chapter 1: Overview
Emulation Probe
Emulation Probe
Equipment supplied
• An emulation probe.
• A 12V power supply for the emulation probe.
•A power cord.
• A target interface module (TIM) circuit board.
• An emulation probe loopback test board (HP part number E3496-66502).
• A 50-pin ribbon cable (connects the emulation probe to the target
interface module).
• A 10-pin ribbon cable (connects the target interface module to your target
system).
• Firmware for the emulation probe on 3.5-inch disks.
• This User’s Guide.