User`s guide

180 CPU32 Emulation
Chapter 11: Troubleshooting the Emulator
Problems with the Serial Interface (Emulation Probe Only)
Problems with the Serial Interface (Emulation
Probe Only)
If you cannot verify RS-232 communication
If the emulation probe prompt does not appear in the terminal
emulator window:
❏
Make sure that you have connected the emulation probe to the proper
power source and that the power light is lit.
❏
Make sure that you have properly configured the data communications
switches on the emulation probe and the data communications parameters
on the host computer. You should also verify that you are using the correct
cable.
The most common type of data communications configuration problem
involves the configuration of the emulator as a DTE device instead of as
a DCE device. If you are using the wrong type of cable, no prompt will
be displayed.
A cable with one-to-one connections will work with a PC or an HP
Series 700 workstation.