User`s guide

148 CPU32 Emulation
Updating Firmware
Firmware gives your emulator a “personality” for a particular processor
or processor family.
After you have connected the emulator to your target system, you may
need to update the firmware to give it the right personality for your
processor.
You must update the firmware if:
• You have an emulation module which was not shipped already installed in
the logic analysis system.
• You need to change the personality of the emulator for a new processor.
• You have an updated version of the firmware from HP.
The procedure for updating firmware for an emulation probe is
different from the procedure for updating firmware for an emulation
module.