User`s guide

CPU32 Emulation 99
Chapter 6: Using Internal Registers (SIM and EMSIM Registers)
Configuring SIM and EMSIM Values Using Built-In Commands
Configuring SIM and EMSIM Values Using Built-
In Commands
To compare SIM and EMSIM registers
Target SIM registers may compared to the EMSIM to determine if they
have changed. The only way to do this is with a built-in command:
•
Enter the
sync diff
command.
This will display the differences between the SIM and EMSIM register
sets.
The emulator, when comparing SIM and EMSIM registers, will not compare
EMSIM registers that have not been set.
When you first turn on the emulator and the target system,
sync diff
will not
find any differences. If one register is modified, just that one register may show
differences. A complete check of the register differences will occur only if a
complete configuration is loaded or the SIM registers are copied to the EMSIM
registers.