User`s guide
Repair Strategy
The repair strategy for this preprocessor interface is board replacement.
However, the following table lists some mechanical parts that may be
replaced if they are damaged or lost. Contact your nearest Hewlett-Packard
Sales Office for further information on servicing the board.
Exchange assemblies are available when a repairable assembly is returned to
Hewlett-Packard. These assemblies have been set up on the "Exchange
Assembly" program. This allows you to exchange a faulty assembly with one
that has been repaired, calibrated, and performance verified by the factory.
The cost is significantly less than that of a new assembly.
Replaceable Parts
HP Part Number
HP E2480A
Description
E2480-69502 Circuit board assembly
E2480-68701 Inverse assembler disk pouch
5041-9491 Extraction Tool
E5346A Flexible Adapter Cable
HP E8115A
E3417A Generic 132-Pin QFP Probe
E8119A 132-pin QFP-FC 6833X Transition Board
HP E8116A
E5336A 144-Pin Elas Probe
E5338A 144-pin TQFP 68332 Adapter
E8120A 144-pin QFP-FV 6833X Transition Board
HP E8118A
E5350A 176-pin TQFP Generic Flex
E5373A 160-pin QFP Elast Probe Adapt
E8122A 160-pin QFP-FT 68336 Transition Board
Reference
Repair Strategy
E2480A Motorola CPU32 Preprocessor Interface 4–19