User`s guide

5 If You Have a Problem
Analyzer Problems 5–3
Intermittent data errors 5–3
Unwanted triggers 5–3
No activity on activity indicators 5–4
No trace list display 5–4
Analyzer won’t power up 5-4
Preprocessor Problems 5–5
Target system will not boot up 5–5
Erratic trace measurements 5–6
Capacitive loading 5–6
Inverse Assembler Problems 5–7
No inverse assembly or incorrect inverse assembly 5–7
Inverse assembler will not load or run 5–8
Intermodule Measurement Problems 5–9
An event wasn’t captured by one of the modules 5–9
Messages 5–10
“. . . Inverse Assembler Not Found” 5–10
“Measurement Initialization Error” 5–11
“No Configuration File Loaded” 5–12
“Selected File is Incompatible” 5–12
“Slow or Missing Clock” 5–12
“Time from Arm Greater Than 41.93 ms” 5–13
“Waiting for Trigger” 5–13
Cleaning the Instrument 5–14
Contents
Contents-4 E2480A Motorola CPU32 Preprocessor Interface