User`s guide

Contents
The HP E2480A Preprocessor Interface —At a Glance ii
1 Overview
Logic Analyzers Supported 1–3
Equipment Used with the Preprocessor 1–4
Equipment supplied 1–4
Minimum equipment required 1–5
Additional equipment supported 1–6
Typical setups using the preprocessor and processor probe
together 1–7
Power-ON/Power-OFF Sequence 1–9
For a stand-alone logic analyzer system 1–9
For a prototype analyzer system 1–9
Connection Sequence 1–10
2 Hooking up Your System
Connecting the Preprocessor to the Target System 2–3
To connect the transition board to the preprocessor 2–4
To connect the preprocessor interface to the probe adapter 2–5
Connecting the probe adapter to the target system 2–6
132-pin PQFP Probe Adapter Rotations 2–7
144-pin TQFP Probe Adapter Rotations 2–8
160-pin QFP Probe Adapter Rotations 2–9
Connecting the Preprocessor to the Logic Analyzer 2–10
Connecting the High-density Cables to the Preprocessor
Interface 2–11
E2480A Motorola CPU32 Preprocessor Interface Contents-1