User manual
Table Of Contents
- Chapter 1: CPEo 450 User Guide
- Chapter 2: Installation
- Chapter 3: Configuration
- Chapter 4: Basic Configuration
- Personalize Menu
- Password Tab
- Device Time Tab
- Device Name Tab
- Restore Factory Settings Tab
- Internet Menu
- WiMAX Security Tab
- Internet Protocol Tab
- Firewall Tab
- Dynamic DNS Tab
- Status Menu
- Network Tab
- Telephony Tab
- Telephony Menu
- Account Tab
- Ring Tone Tab
- Caller ID Tab
- Call Forwarding Tab
- Voice Mail Tab
- Special Number Tab
- Chapter 5: Advanced Configuration
- Chapter 6: Configuring TCP/IP
- Chapter 7: Troubleshooting
- Chapter 8: Important Safety and Legal Information
- This Product complies with the following RF energy exposure standards and guidelines:
- RF Exposure Compliance and Control Guidelines and Operating Instructions
- FCC Regulatory Information
- Industry Canada Statement
- IC Radiation Exposure Statement:
- EU Declaration of Conformity
- Caring for the Environment
- Disposal of Motorola Equipment in EU Countries
- Disposal of Motorola Networks Equipment in Non-EU countries
- CMM Disclosure
- Copyrights and Trademarks
- Copyrights
- Usage and Disclosure Restrictions
Configuration 3
Chapter 3: Configuration
Before you Begin
Some settings on your computer need to be verified or changed to ensure that your
computer configuration can support the CPE.
Verify that the IP addresses and DNS settings are automatically generated in your
Local Area connection of your Internet Protocol (TCP/IP) properties. Refer to the
chapter titled “Configuring TCP/IP” for additional information.
Logging in to the CPE
Use the following procedure to log into the CPE:
1. On a computer that is connected to the CPE, open a web browser.
2. In the Address or Location field, type http://mywimax. and press ENTER to
display the login screen. Include the period (.) after http://mywimax. in order to
access the login screen.
In case the user friendly link does not open the web GUI enter the IP
address: http://192.168.15.1 into Address field. If you still cannot access
the CPE, refer to the chapter titled: Configuring TCP/IP for more
information.
3. The Welcome to Motorola WiMAX CPE screen is displayed and prompts you for a
password.
68P09306A78-A 3-1
FEB 2010