User`s guide
Table Of Contents
- Welcome
- Contents
- Safety and General Information
- Getting Started
- Learning to Use Your Phone
- Setting Up Your Phone
- Calling Features
- Changing the Active Line
- Redialing a Number
- Using Automatic Redial
- Using Caller ID
- Canceling an Incoming Call
- Turning Off a Call Alert
- Calling an Emergency Number
- Dialing International Numbers
- Viewing Recent Calls
- Returning an Unanswered Call
- Using the Notepad
- Attaching a Number
- Calling With Speed Dial
- Calling With 1-Touch Dial
- Using Voicemail
- Using Call Waiting
- Putting a Call On Hold
- Transferring a Call
- Phone Features
- Specific Absorption Rate Data
- Additional Health and Safety Information
- Warranty
- Product Registration
- Export Law Assurances
- Index
- Wireless Phone Safety Tips
6
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING YOUR PHONE.
The information provided in this document supersedes the general safety
information contained in user guides published prior to July 2000. For
information regarding radio use in a hazardous atmosphere please refer
to the Factory Mutual (FM) Approval Manual Supplement or Instruction
Card, which is included with radio models that offer this capability.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Operational Characteristics
Your phone contains a transmitter and a receiver. When it is ON, it
receives and transmits radio frequency (RF) energy. In North America
and South America, the phone operates in the frequency ranges of 824
MHz to 849 MHz and 1850 MHz to 1910 MHz in digital mode. In Europe,
the Middle East, and Africa, the phone operates in the frequency ranges
of 880 MHz to 915 MHz and 1710 MHz to 1785 MHz in digital mode.
When you communicate with your phone, the system handling your call
controls the power levels at which your phone transmits. In North and
South America, the output power level typically may vary over a range
from 0.0 watts to 0.87 watts in digital mode for the 850 MHz band, and
0.00 watts to 0.87 watts in digital mode for the 1900 MHz band. In Europe,
the Middle East, and Africa, the output power level typically may vary over
a range from 0.0 watts to 1.74 watts in digital mode for the 900 MHz band,
and 0.0 watts to 0.87 watts in digital mode for the 1800 MHz band.