User manual

2 Installation
Advanced Setup
The CPE can also be used to connect to a multi-port switch (hub) – purchased separately from the
CPE. Connecting the CPE device to a hub allows you to connect more than one computer to your
CPE device.
Procedure to Log into the CPE
Before you Begin Configuration
Some settings on your computer need to be verified or changed to ensure that your computer
configuration can support the Desktop CPE.
Verify that the IP addresses and DNS settings are automatically generated in the Local Area
connection of your Internet Protocol (TCP/IP) properties. Refer to the chapter titled “Configuring
TCP/IP” for additional information.
Logging in to the CPE
Use the following procedure to log into the Desktop CPE:
1. On a computer that is connected to the Desktop CPE, open a web browser.
2. In the Address or Location field, type http://mywimax. and press ENTER to display the login
screen.
Include the period (.) after http://mywimax. in order to access the login screen.
Alternatively, you may enter the IP address: http://192.168.15.1 into the Address field in order to
gain access to your CPE. If you cannot access the CPE, refer to the chapter titled: Configuring
TCP/IP for more information.
3. The Welcome to Nokia Siemens Networks WiMAX CPE screen is displayed and prompts you for
a password.
2-2
AUG 2011