User manual

1 CPEi 800/825 User Guide
Powerful Features in a Single Unit
The CPE device provides the following features:
 WiMAX Authentication
 WAN DHCP Client
 LAN DHCP Server
 Home Gateway Functions
 Firewall Protection
 Port Forwarding
Front of the CPE
The front of the CPE unit contains LED Link/Activity indicators. The LEDs show the status of the
unit and signal strength indicators for easy adjustment during setup.
Table 1-1 LED Indicator Interface
LED Status
Signal Strength Full WiMAX Signal Strength is detected when all WiMAX Signal Strength
LEDs are lit.
 All WiMAX Signal Strength LEDs are off - very low signal detected.
 One to two WiMAX Signal Strength LEDs are lit - low signal detected.
 Three to five WiMAX Signal Strength LEDs are lit - high signal
detected.
WAN WiMAX While acquiring access to the WiMAX Network:
 All WiMAX Signal Strength LEDs vary between ON, OFF and/or
BLINKING status.
If all five WiMAX Signal Strength LEDs are blinking, then a software upgrade is in progress. Do
NOT remove power to the CPE.
1-2
AUG 2011