User manual
5
Configuring TCP/IP
7. Click Protocol on the Select Network Component type window and click Add. The
Select
Network Protocol window is displayed:
Figure 5-6: Select Network Protocol
You might have to use the scroll bar to locate the Internet Protocol (TCP/IP) setting.
8. Click Internet Protocol (TCP/IP).
9. Click OK. The local Area Connection Number Properties window is re-displayed.
10. Be sure the box next to Internet Protocol (TCP/IP) is checked.
11. Click Properties. The Internet Protocol (TCP/IP) Properties window is displayed.
Figure 5-7: Internet Protocol (TCP/IP) Properties
5-4
AUG 2011