User manual

Configuring TCP/IP

Chapter 5: Configuring TCP/IP

This section contains two examples of configuring TCP/IP in a Windows environment.

Most computers already have the TCP/IP configuration enabled. Use the following procedures to

verify the configuration is set up. Configure all client computers on your network for TCP/IP (the

protocol that controls communication among computers).

Two examples are provided in this document:

 Configuring TCP/IP in Windows 2000

 Configuring TCP/IP in Windows XP

Follow the instructions in your computer user manual for other Operating Systems.

Configuring TCP/IP in Windows 2000

1. On the Windows desktop, click Start.

2. Select Settings and then Control Panel from the pop-up menus to display the Control Panel

window:

Figure 5-1: Windows Control Panel

UG 2011

5-1