User manual

4
Advanced Configuration
Table 4-1 Port Forwardi
ng Menu
Click Apply when you are finished.
Forwarding Tab
Click ADD to create additional Port Forwarding rules.
Table 4-2 Forwarding Tab
Field or Button Description
Enable UPnP IGD Enables the Universal Plug and Play (UPnP) Internet
Gateway Device (IGD) profile to allow certain Windows
applications to set up the port forwarding rule
dynamically when NAT is enabled on this device.
DMZ (DeMilitarized Zone) IP Address Enter the DMZ IP Address.
Field or Button Description
Select Select a box when you want to delete the specific row.
Protocol Select TCP (Transmission Control Protocol) or UDP (User
Datagram Protocol).
WAN Port Start Enter the beginning port range for external network access.
WAN Port End Enter the ending port range for external network access.
LAN IP Address Enter the IP address to host the service.
LAN Port Start Enter the beginning port range for internal network access.
LAN Port End Enter the ending port range for internal network access.
Enabled Check to enable specific port forwarding.
Click Apply when you
are finished.
Local Address Menu
The Local Address menu allows you to configure your Local Area Network (LAN) connections.
The Local Address menu provides the following tabs:
 DHCP Server
 Lease Status
 Lease Reservation
To access the Local Address menu, click the Computer icon, then click Local Address.
4-2
AUG 2011