User manual

3
Basic Configuration
Ring Tone Tab
The Ring Tone tab allows you to customize ring tones for your telephone(s).
You need a phone connected to your CPE to hear ring tones.
Table 3-9 Ring Tone Tab
Click Apply when you are finished.
Caller ID Tab
The Caller ID tab allows you to manage the Caller ID functions for your telephone(s).
Table 3-10 Caller ID Tab
Click Apply when you are finished.
Call Forwarding Tab
The Call Forwarding tab allows you to manage the call forwarding features for your telephone(s).
Table 3-11 Call Forwarding Tab
Field or Button Description
Default Line Ring Type Use the drop-down box to select a ring tone for Line. The
default is ring tone R0.
Test Click to hear how the selected ring tone sounds.
Field or Button Description
Enable Line Anonymous Incoming Call
Rejection
If Line is your active telephone port, check this box to
reject telephone calls from anonymous incoming callers.
The default is checked.
Enable Line Permanent Anonymous
Outgoing Call
If Line is your active telephone port, check this box to
permanently block your telephone number from
appearing on others’ Caller ID. The default is unchecked.
Field or Button Description
Enable Line Basic Forwarding Check this box to enable basic call forwarding on Line. The
default is unchecked.
Line Basic Forwarding to Number If “Enable Line Basic Forwarding” is checked, enter the
telephone number you would like to forward calls to.
(Continue)
3-8
AUG 2011