User manual

3
Basic Configuration
WiMAX Security Tab
The WiMAX Security tab contains your authentication method. Check with your service provider to
determine if user name and password are required for authentication purposes.
Table 3-5 WiMAX Security Tab
If your authentication method is EAP-TLS, a User Name and Password is not required. Click Apply.
Internet Protocol Tab
Check with your service provider for these settings. If you are unsure of the settings, leave the
default values set. Click Apply.
If your service provider has instructed you to change any of these settings, click Apply when
finished.
Firewall Tab
A firewall helps to protect your home network from unauthorized access. It also helps to manage
authorized access from the internet to your CPE.
Table 3-6 Firewall Tab
Field or Button Description
Authentication Method Drop down box allows you to select either EAP-TLS
(default) or EAP-TTLS/MSCHAPv2.
User Name (EAP-TTLS/MS-CHAPv2
only)
Enter the User Name supplied by your service provider.
Password (EAP-TTLS/MS-CHAPv2 only) Enter the Password supplied by your service provider.
Realm Supplied by your service provider.
Field or Button Description
Enable Firewall Check this box to enable the firewall for your home
network.
Enable Web Login from Internet (Grayed out if Enable Firewall is not selected).
Checking this box enables you to access your CPE device
from a network other than your own.
Web Login Port from Internet Choose a port number to connect to when logging in
from a network other than your own. The default is 8080.
Enable ping from Internet Enables the CPE to respond to a ping from the Internet.
This option is enabled to allow testing only. Do not leave
this enabled.
Click Apply
when you are finished.
3-4
AUG 2011