User manual

2 Installation
In some earlier versions of software, the default password is motorola.
Step 2 - Device Time
This screen allows you to set the time zone and to enable Daylight Savings Time (when applicable)
for your location.
 Select the appropriate time zone for your location from the drop-down box.
 Check “Auto Adjust for Daylight Savings Time” if you live in a region that observes Daylight
Savings Time. This box is checked by default.
 Click Next.
Step 3 - WiMAX Security
The WiMAX Security tab contains your authentication method. Check with your service provider to
determine if they require a user name and password for authentication purposes.
 If the Authentication Method is EAP-TLS, a User Name and Password is not required. Enter the
Realm information supplied by your service provider. Click Next.
 If the Authentication Method is EAP-TTLS/MS-CHAPv2, enter User Name and Password, and
Realm information supplied by your Service Provider. When you have entered the User
Name/Password/Realm information, click Next.
 If you are unsure of the Authentication Method, select EAP-TLS (which is the default) and click
Next.
Step 4 – Account
The Account tab allows you to manage Voice over IP (VoIP) related services. Please consult with
your telephony service provider for these settings.
Click Apply when finished.
Congratulations! You have now completed the setup of your WiMAX connection.
Click OK on the Congratulations! dialog box.
A status screen appears that shows Network status and telephony status. The Network Status
screen provides any status associated with your WiMAX Wireless Broadband connection. The
Telephony Status screen provides status of your telephony service.
 Restart is used to restart the device. The restart button is available on every screen.
 Wizard starts the set-up wizard over again.
 Refresh refreshes the screen with the current status.
 Auto Refresh allows the web browser to automatically refresh at the interval determined in the
Control Panel menu.
2-4
AUG 2011