User manual

Installation 2
F
igure 2-1: Login Screen
4. In the password field, type the password (default is nsn).
5. Click Login.
6. First time users see a pop-up box that states: “The Wizard application will guide you through
for the first time configuration”. Click OK to continue.
7. Click the OK to launch the wizard application.
In some earlier versions of software, the default password is motorola.
Setup Wizard and Authentication
Step 1 - Change Password
After you have launched the setup wizard, you are prompted to change your password. Nokia
Siemens Networks recommends using a password to protect your home network and CPE device.
Passwords are case sensitive.
To change your password:
 Ensure the “Enable Login Password Protection” box is checked.
 Enter a New Login Password in the box. Passwords can be no more than 20 characters in length.
 Re-type your new password in the Confirm New Login Password box.
 Click Next.
If you forget your password, you can reset it back to the default (nsn) password. To reset the
password, press and hold the reset button on the back of your CPE for 7 or more seconds. Before
resetting the CPE, ensure that the power is ON.
A
UG 2011
2-3