user manual

PrPMC800/800ET Processor PMC Module Installation and Use (PrPMC800A/IH5)
4 Connector Pin Assignments
38
Debug Serial Port Cable
The following cable pinout information is provided for those using the debug serial port cable in
conjunction with the operation of the PrPMC800/800ET.
Table 4-8. PrPMC Cable-001 Termination
Signal Name 2mm
20-Receptacle Pin
(
TCSD-10-01)
Mating Connector Mating
Connector Pin
CPUTDO 1 .100’x.100x IDC plug
connector, 16-pin
(4616-7001)
1
CPUTDI 3 3
CPUTRST_L 4 4
PULLUP 6 6
CPUTCK 7 7
CPUTMS 9 9
SRESET_L 11 11
CPURST_L 13 13
CKSTPO_L 15 15
GND 16 16
GND 14 D-sub plug
connector, 9-pin
(8209-6000)
5
TXD 19 3
RXD 20 2