user manual

5-14 Computer Group Literature Center Web Site

Removal and Replacement Procedures

Optional Air Filter Kit

If you are using the optional air filter (MVME946AFO) and wish to

replace it, refer to Related Documentation on page 1-10 for information on

the Air Filter Kit.

Replacement

1. Attach the new fan to the fan tray with the screws removed in Step

9 above.

2. Plug the appropriate fan wire connector into its mating connector.

3. Rotate the fan tray and air filter door back into place and secure

them with the screws removed in Step 4 and Step 6 of the removal

procedure. Set the unit upright if it is not mounted in a rack.

4. Reinstall the front bezel.

5. Slide the MVME956AC chassis back into its rack mounting or

reinstall the top panel and side panels on your lab benchtop unit.