user manual

VME64x Bus Backplane
http://www.mcg.mot.com/literature 5-11
5
Replacement
1. Attach the stiffener to the backplane with the screws removed in
Step 11 above.
2. Position the backplane with the J1 and J2 connectors toward the
front of the chassis.
3. Attach the backplane to the chassis frame members with the screws
removed in Step 10 above.
4. Attach the ends of the stiffener to the chassis using the screws
removed in Step 9 above.
5. Attach the ground bus bar to the backplane with the screws removed
in Step 8 above.
6. Connect all power wires removed in Step 7 above.
7. Connect all cables removed in Step 6 above to the rear of the
backplane.
8. Slide the card file back into position and attach with the screws
removed in Step 5.
9. Install the modules removed in Step 2 above.
10. Replace the top cover of the chassis with the screws removed in Step
4 above.
11. Slide the MVME956AC chassis back into its rack mounting or
reinstall the top panel on your lab benchtop unit.
12. Connect all external cabling removed in Step 2 above.