user manual

MVME3100 Installation and Use (V3100A/IH1)

Chapter 5 Pin Assignments

Planar sATA Power Connector (J30)

There is one 2mm pitch header installed as a planar header on the MVME3100 board to provide

power to a serial ATA (sATA) drive mounted on the board or somewhere within the chassis. The

pin assignments for this header are as follows:

USB Connector (J27)

There is one USB Type A connector located on the MVME3100 front panel. The pin

assignments are as follows:

49 No Connect GND 50

51 No Connect No Connect 52

53 +5V No Connect 54

55 No Connect No Connect 56

57 No Connect +3.3V 58

59 No Connect No Connect 60

61 No Connect No Connect 62

63 No Connect No Connect 64

Table 5-13. MVME721 Host I/O Connector (J10) Pin Assignments

Table 5-14. Planar sATA Power Connector (J30) Pin

Assignments

Pin Signal

1+5V

2+5V

3GND

4GND

Table 5-15. USB Connector (J27) Pin Assignments

Pin Signal

1 USB_VBUS (+5.0V)

2 USB_DATA-

3 USB_DATA+

4GND