user manual

Chapter 4 Functional Description
MVME3100 Installation and Use (V3100A/IH1)
37
VME Interface – VME64 (ANSI/VITA 1-1994) compliant
– VME64 Extensions (ANSI/VITA 1.1-1997) compliant
– 2eSST (ANSI/VITA 1.5-2003) compliant
– VITA 41.0, version 0.9 compliant
– Two five-row P1 and P2 backplane connectors
– One TSi148 VMEbus controller
Form Factor – Standard 6U VME
Miscellaneous – One front-panel reset/abort switch
– Four front-panel status indicators: 10/100/1000 Ethernet
link/speed and activity, board fail, and user software controlled LED
– Six planar status indicators: one power supply status LED, two
user software controlled LEDs, three sATA activity LEDs (one per
channel)
– One standard 16-pin COP header
– Boundary scan support
– Switches for VME geographical addressing in a three-row
backplane
Software Support – VxWorks operating system
– Linux operating system
Table 4-2. MVME721 RTM Features Summary
Feature Description
I/O – One five-row P2 backplane connector for serial and Ethernet I/O
passed from the MVME3100
– Four RJ-45 connectors for rear-panel I/O: four asynchronous
serial channels
– Two RJ-45 connectors with integrated LEDs for rear panel I/O:
one 10/100/1000 Ethernet channel and one 10/100 Ethernet
channel
– One PIM site with rear-panel I/O
Miscellaneous – Four status indicators: 10/100/1000 and 10/100 Ethernet
link/speed and activity LEDs
Table 4-1. MVME3100 Features Summary (continued)
Feature Description