user manual

3-24
Hardware Preparation and Installation
3
Completing the Installation
Starting the System
After completing the preparation and installation procedures, you
are ready to start up your system.
Table 3-13. Installation Completion Procedure
Step Action...
1 Reassemble the chassis.
2 Reconnect the AC power.
Table 3-14. System Startup Overview
Stage What you will need to do... Refer to...
1 Power up the system and note that the
debugger prompt appears.
Page 3-25; Starting Up 187Bug on page
4-6; and the MVME187Bug Debugging
Package User's Manual.
2 Initialize the real-time clock. Page 3-25.
3 Examine and/or change
environmental parameters.
Page 3-25 and ConÞgure and
Environment Commands on page A-1.
4 Program the PCCchip2 and
VMEchip2.
System Considerations on page 3-27,
Memory Maps
on page 2-24, ASICs
on page 2-8, and the Single Board
Computer Programmer's Reference
Guide.