user manual

3-10
Hardware Preparation and Installation
3
System Controller Header J2
The MVME187 can be VMEbus system controller. The system
controller function is enabled by installing a jumper on header J2
(see Table 3-4). When the MVME187 is system controller, the SCON
LED is turned on.
Table 3-4. Settings for J2 System Controller Header
Header
Number
Header
Description
ConÞguration Jumpers
J2
System
controller
header
System
controller
(Factory
conÞguration)
Not system
controller
J2
1 2
J2
1
2