user manual

Setting Environment to Bug/Operating System
A-11
A
Master Enable #1 [Y/N] Y Yes, Setup and enable the Master
Address Decoder #1.
Master Starting Address #1 02000000 Base address of the VMEbus resource
that is accessible from the local bus.
Default is the end of calculated local
memory.
Master Ending Address #1 EFFFFFFF Ending address of the VMEbus
resource that is accessible from the
local bus. Default is the end of
calculated memory.
Master Control #1 0D Works the same as Slave Control #1.
Default is $0D.
Master Enable #2 [Y/N] N Do not set up and enable the Master
Address Decoder #2.
Master Starting Address #2 00000000 Base address of the VMEbus resource
that is accessible from the local bus.
Default is $0.
Master Ending Address #2 00000000 Ending address of the VMEbus
resource that is accessible from the
local bus. Default is $0.
Master Control #2 00 Works the same as Slave Control #1.
Default is $00.
Master Enable #3 [Y/N] N Do not set up and enable the Master
Address Decoder #3.
Master Starting Address #3 00000000 Base address of the VMEbus resource
that is accessible from the local bus.
Default is $0.
Master Ending Address #3 00000000 Ending address of the VMEbus
resource that is accessible from the
local bus. Default is $0.
Master Control #3 00 Works the same as Slave Control #1.
Default is $00.
Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options Default Meaning of Default