user manual

MVME162IG/D2 IN-7
I
N
D
E
X
Q
QIC-02 streaming tape drive B-4
R
range 4-2
RARP/ARP protocol 3-18
readable jumpers 2-8
registers used in debugging 4-6
related documentation 1-2
relative address+offset 4-6
requirements 1-5
RESET switch 1-10, 3-9
restarting the system 3-8
Reverse Address Resolution Protocol
(RARP) 3-18
RFI 2-10
ROMboot 3-7
RUN LED 1-10
S
SCC (Serial Communications Controller)
(see Z85230) 1-15, 3-6
scientific notation 4-19
SCON LED 1-10
SCSI Common Command Set (CCS) B-2,
B-4
SCSI Controller (53C710) 1-18
SCSI interface 1-18
SCSI LED 1-10
SCSI specification 1-4
SCSI termination 1-18
SCSI terminator power 2-12
SD command (see also directories,
switching) 3-21
sector size 3-13
self-test routines 3-20
sequential access device B-2, B-4
serial 1-15
Serial Communications Controller (SCC)
(see Z85230) 1-15, 3-6
serial communications interface 1-15
Serial Interface Module (SIM)
installation 2-5
model numbers 1-16
part numbers 2-4
removal 2-4
selection 2-2
serial port 1 4-8
serial port 2 4-8
Serial Port 2, MVME712X 1-16
Serial Port 4, MVME712X 1-17
serial port interface 1-15
Set Environment to Bug/Operating
System (ENV) A-3
short I/O space 1-25, 3-21
sign field 4-17
SIM 1-17
single precision real format 4-18
slave address decoders A-8
snoopin 1-11
software-programmable hardware
interrupts 1-19
source line 4-9
special considerations for elevated
temperature operation 1-7
specifications 1-4, 1-5
square brackets 4-2
SRAM (static RAM) 1-12
SRAM (static RAM) options 1-12
SRAM battery backup source select
header (J20) 2-7
SRAM options 1-12
S-record format 4-9
stack 3-11
stack pointers 4-11
start-up, 162Bug 3-3
STAT (status) LED 1-10
static RAM (SRAM) 1-12
static variable space 3-11
status bit 1-8
streaming tape drive (see QIC-2
streaming tape drive) B-4
string literal 4-3
switches 1-10