user manual

MVME162IG/D2 IN-5
I
N
D
E
X
Interrupt Stack Pointer (ISP) 3-11
interrupts, programmable 1-19
introduction 1-1, 2-1
IOC (I/O Control) 3-15
IOI (Input/Output Inquiry) 3-14
IOP (Physical I/O to Disk) 3-14
IOT (I/O Teach) 3-14
IOT command parameters B-5
IOT command parameters for supported
floppy types B-5
IP (Industry Pack) installation on the
MVME162 2-9
ISP (Interrupt Stack Pointer) 3-11
italic strings 4-2
J
J1 jumper 2-5
J11 jumpers 2-6, 3-5
J12 jumpers 2-6, 3-5
J20 jumpers 2-7
J21 jumper 2-7, 3-5
J22 jumpers 2-8, 3-5, 3-10
jumpers, setting 2-5, 3-3
jumpers, user-definable 2-8
L
LAN (see 82596CA and Ethernet) 1-17
LAN LED 1-10
layout, MVME162 2-3
LEDs 1-10
Level 7 interrupt 4-11
level significant 1-8
Local Area Network (LAN) 1-17
local bus 1-11
local bus arbiter 1-20
local bus arbitration priority 1-20
local bus I/O devices memory map 1-23
local bus memory map 1-21
local bus timeout 1-19
local bus/VMEbus interface 1-15
local I/O devices memory map 1-23
local resources 1-19
location monitors 2-12
logical unit number (LUN) (see CLUN or
DLUN)
longword 1-8
LUN (logical unit number) (see CLUN or
DLUN)
M
mantissa field 4-17
manual terminology 1-8
manufacturing test process 3-22
map decoder, GCSR 1-25
MC68040 TRAP instructions 4-9
MC68040, MC68LC040 1-11
MC68xx040 cache 1-11
MCchip 1-2, 1-13
MCchip LCSR 2-8
Memory Management Units (MMUs)
4-10
memory maps 1-20
local bus 1-21
local I/O devices 1-23
VMEbus 1-25
VMEbus short I/O 1-25
memory options 1-12
memory requirements, 162Bug 3-10
memory size A-13
metasymbols 4-2
MK48T08 (see Battery Backed Up RAM,
BBRAM, and NVRAM) 1-14
models, MVME162 3
modem 1-16
MPAR (Multiprocessor Address
Register) 3-20
MPCR (Multiprocessor Control Register)
3-19
MPU clock speed calculation 3-10
multiple MVME162s 2-12
Multiprocessor Address Register
(MPAR) 3-20
Multiprocessor Control Register (MPCR)
3-19