User Guide Communications Gateway

31 Communications Gateway User Guide
X
Home Print Exit
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary
License
Setting Up a USB Driver in Windows XP
Be sure the Motorola Communications Gateway CD-ROM is inserted into the CD-ROM
drive before you plug in the USB cable. A few seconds after you complete the USB
connection, the Found New Hardware Wizard window is displayed.
1 Be sure “Install the software automatically” is selected.
2 Click Next.
3 Click Finish to complete the installation.
When you have successfully finished setting up the USB driver, you can continue with
“Configuring TCP/IP in Windows 2000 or XP” on page 36.
Although your Motorola Communications Gateway model
number may be different than in the images in this guide, the
procedure is the same.