Manualshelf

User Guide Communications Gateway

ManualsBrandsMotorola ManualsNetwork CardCommunications Gateway
11121314151617181920
13 Communications Gateway User Guide
X
Home Print Exit
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary
License
Cabling and Startup for a Single User
Allow 5 to 30 minutes to power up the first time because the Motorola Communications
Gateway must find and lock on the appropriate channels for communications.
1 Be sure your computer is on and the Communications Gateway is unplugged.
2 Connect one end of the coaxial cable to the cable outlet or splitter.
3 Connect the other end of the coaxial cable to the Coax connector on the
Communications Gateway.
4 Hand-tighten the connectors to avoid damaging them.
5 Insert the Motorola Communications Gateway CD-ROM into your CD-ROM drive.
Coax connector
To cable outlet
or splitter