User Guide Communications Gateway

9 Communications Gateway User Guide
Precautions, continued
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary
License
X
Home Print Exit
If you mount your Communications Gateway on the wall following the instructions in “Wall
Mounting” on page 50, be sure that you:
■ Mount the Communications Gateway with the battery terminals facing up or
sideways. To prevent possible leakage, do not mount the Communications Gateway
with the battery terminals facing down.
■ Use the Wall Mounting Template on page 53 to position the mounts
■ Before drilling holes, check the structure for potential damage to water, gas, or
electric lines.
■ Use M5 x 38 mm (#10-16 x 1
1
/
2
inch) wall mounts that can support at least 2.5 kg
(5.5 lbs) and anchors if necessary
You must comply with the following battery-related precautions:
■ Do not short circuit the battery terminals by simultaneously touching both terminals
with a metal object.
■ Do not charge the battery under airtight conditions.
■ Do not disassemble, drop, or mechanically shock the battery.
■ Do not expose the battery to flame or spark.
■ Keep the battery out of the reach of children.