Specifications

February 23, 2000 Motorola Personal Communications Sector Page 44
Satellite Subscriber Products Division
Motorola Personal Communications Sector
Satellite Subscriber Products Division
ISU AT Command Reference Extended Wireless Commands (+W)
+WIRLP: (supported <ver>s), (supported <k1>s), (supported
<k2>s), (supported <t1>s), (supported <n2>s), (supported
<t2>s), (supported <r1>s), (supported <r2s), (supported
<t4>s), (supported <mode>s)
8.2 +WFRNG - Force IRLP Renegotiation
Set Command: +WFRNG=<frng>
Set forced renegotiation of IRLP parameters.
<frng> can take the following values:
0 Do not renegotiate (default)
1 Renegotiate
2 Disconnect
Read Command: +WFRNG?
Query the current parameter setting. The response is in the form:
+WFRNG: <frng>
Test Command: +WFRNG=?
List the supported parameter settings. The response is in the form:
+WFRNG: (supported <frng>s)
8.3 +WTM - IRLP Test Mode
Set Command: +WTM=<tm>
Select DCE mode of operation.
<tm> can take the following values:
0 IRLP test mode off (default)
1 IRLP test mode on
Read Command: +WTM?
Query the current parameter setting. The response is in the form:
+WTM: <tm>
Test Command: +WTM=?
List the supported parameter settings. The response is in the form:
+WTM: (supported <tm>s)
8.4 +WDLDM - IRLP Dynamic Link Delay Measurement
Set Command: +WDLDM=[<dldm>[,<mi>[,<dtl>]]]
Set the DCE dynamic link delay measurement parameters.
<dldm> can take the following values:
0 measurement off (default)
1 measurement on