Specifications

February 23, 2000 Motorola Personal Communications Sector Page 37
Satellite Subscriber Products Division
Motorola Personal Communications Sector
Satellite Subscriber Products Division
ISU AT Command Reference Extended Cellular Commands (+C)
1 synchronous modem
2 PAD Access (asynchronous)
3 Packet Access (synchronous)
4 voice
5fax
<itc> (information transfer capability):
0 3.1 kHz
1 UDI
4.44 +CSSN - Supplementary Service Notification
Set Command: +CSSN=[<n>[,<m>]]
This command refers to supplementary service related network initiated notifications. The set command
enables or disables the presentation of notification result codes from the ISU to the DTE.
<n> can have one of the following values:
0 disable
1 enable
When <n>=1 and a supplementary service notification is received after a mobile originated call setup, inter-
mediate result code +CSSI: <code1>[,<index>] is sent to DTE before any other MO call setup result
codes. When several different <code1>s are received from the network, each of them shall have its own
+CSSI result code.
<m> can have one of the following values:
0 disable
1 enable
When <m>=1 and a supplementary service notification is received during a mobile terminated call setup or
during a call, or when a forward check supplementary service notification is received, the unsolicited result
code +CSSU: <code2>[,<index>[,<number>,<type>[,<subaddr>,<satype>]]] is sent
to the DTE. When several different <code2>s are received from the network, each of them shall have its own
+CSSU result code.
The values returned in the unsolicited result codes are as follows:
<code1>:
0 unconditional call forwarding is active
1 some of the conditional call forwardings are active
2 call has been forwarded
3 call is waiting
4 this is a CUG call (also <index> present)
5 outgoing calls are barred
6 incoming calls are barred
7 CLIR suppression rejected
8 call has been deflected
<index>: refer "Closed user group +CCUG"
<code2>: