Specifications

February 23, 2000 Motorola Personal Communications Sector Page 32
Satellite Subscriber Products Division
Motorola Personal Communications Sector
Satellite Subscriber Products Division
ISU AT Command Reference Extended Cellular Commands (+C)
0 type not supported
1 type supported
Read Command: +CSMS?
Read command returns the current message service type set. Response is in the form:
+CSMS: <service>,<mt>,<mo>,<bm>
Test Command: +CSMS=?
Test command returns the supported message services of the phone. Response is in the form:
+CSMS: (list of supported <service>s)
4.35 +CSQ - Signal Quality
Exec Command: +CSQ
Execution command returns the received signal strength indication <rssi> and channel bit error rate <ber>
from the phone. No real signal quality indication is supported at this time for the satellite phones.
Response is in the form:
+CSQ: <rssi>,<ber>
where <rssi> is:
99 not known or not detectable
and <ber> (in percent):
99 not known or not detectable
4.36 +CSTA - Select Type of Address
Set Command: +CSTA=[<type>]
Select the type of number for the dial command D. <type> is the type of address in integer format specified
in GSM 4.08 subclause 10.5.4.7. Typical values for <type> are:
129 Unknown type (default)
145 International number.
Read Command: +CSTA?
Query the current address type settings. The response is in the form:
+CSTA: <type>
Test Command: +CSTA=?
List the supported address type settings. The response is in the form:
+CSTA: (supported <type>s)
4.37 +CCFC - Set Call Forwarding
Set Command: +CCFC=<reason>,<mode> [,<number>[,<type> [,<class> [,<subaddr>[,<satype>
[,<time>]]]]]]
This command allows control of the call forwarding supplementary service according to GSM 02.82. Regis-
tration, erasure, activation, deactivation, and status query are supported. The valid values for the parameters
are as follows: