Specifications

February 23, 2000 Motorola Personal Communications Sector Page 31
Satellite Subscriber Products Division
Motorola Personal Communications Sector
Satellite Subscriber Products Division
ISU AT Command Reference Extended Cellular Commands (+C)
Read command returns the current service center address. Response is in the form:
+CSCA: <sca>,<tosca>
4.32 +CSCB - Select Cell Broadcast Message Types
Set Command: +CSCB=[<mode>[,<mids>[,<dcss>]]]
Set command selects which types of CBMs are to be received by the ME.
No action, compatibility only.
Read Command: +CSCB?
Read command returns the current values for <mode>, <mids> and <dcss>. Response is in the form:
+CSCB: <mode>,<mids>,<dcss>
Test Command: +CSCB=?
Test command returns supported modes. Response is in the form:
+CSCB: (list of supported <mode>s)
4.33 +CSCS - Select TE Character Set
Set Command: +CSCS=[<chset>]
Set command informs the phone which character set <chset> is used by the DTE. Only the IRA character set
is currently supported. <chset> should be of string type enclosed by ““; for example, “IRA”.
Valid values for <chset> are:
"IRA" international reference alphabet (ITU-T T.50)
Read Command: +CSCS?
Read command returns the current character set used. Response is in the form:
+CSCS: <chset>
Test Command: +CSCS=?
Test command returns the supported character set of the phone. Response is in the form:
+CSCS: (list of supported <chset>s)
4.34 +CSMS - Select SMS Message Service
Set Command: +CSMS=<service>
Set command selects short messaging service <service>. It returns the types of messages supported by the
phone: <mt> for mobile terminated messages, <mo> for mobile originated messages and <bm> for broad-
cast type messages. If chosen service is not supported, final result code +CMS ERROR: <cms_err> shall be
returned. Only message service type 0 is currently supported.
Valid values for <service> are:
0 GSM 03.40 and 03.41 (the syntax of SMS AT commands is compatible with GSM
07.05 Phase 2 version 4.7.0) (default)
Response is in the form:
+CSMS: <mt>,<mo>,<bm>
where, <mt>, <mo>, <bm>: