Specifications

February 23, 2000 Motorola Personal Communications Sector Page 29
Satellite Subscriber Products Division
Motorola Personal Communications Sector
Satellite Subscriber Products Division
ISU AT Command Reference Extended Cellular Commands (+C)
Test Command: +CPWD=?
Test command returns a list of pairs which present the available facilities and the maximum length of their
password. Response is in the form:
+CPWD: list of supported (<fac>,<pwdlength>)s
where <pwdlength> indicates the maximum length for the password.
4.28 +CR - Service Reporting Control
Set Command: +CR=[<mode>]
Set the service reporting level.
<mode> takes the following values:
0 Disable reporting (default).
1 Enable reporting.
If reporting is enabled, the intermediate result code +CR: <serv> is returned by the ISU.
<serv> can have one of the following values:
ASYNC asynchronous transparent
SYNC synchronous transparent
REL ASYNC asynchronous non-transparent
REL SYNC synchronous non-transparent
Read Command: +CR?
Query the current service reporting level settings. The response is in the form:
+CR: <mode>
Test Command: +CR=?
List the supported reporting levels. The response is in the form:
+CR: (supported <mode>s)
4.29 +CRC - Cellular Result Codes
Set Command: +CRC=[<mode>]
Set the extended format of incoming call indication.
<mode> takes the following values:
0 Disable extended format (default).
1 Enable extended format.
If extended format is enabled, the unsolicited result code +CRING: <type> is returned by the ISU instead
of RING, where <type> can be one of the following:
ASYNC asynchronous transparent
SYNC synchronous transparent
REL ASYNC asynchronous non-transparent
REL SYNC synchronous non-transparent
Read Command: +CRC?
Query the current result code settings. The response is in the form: