Specifications

February 23, 2000 Motorola Personal Communications Sector Page 27
Satellite Subscriber Products Division
Motorola Personal Communications Sector
Satellite Subscriber Products Division
ISU AT Command Reference Extended Cellular Commands (+C)
4.23 +CPBS - Select phonebook storage
Set Command: +CPBS=<storage>
Set command selects phonebook memory storage <storage>, which is used by other phonebook commands.
<storage> takes the following values:
"FD" SIM fixed dialing-phonebook
"ME" ME phonebook
"MT" combined ME and SIM phonebook (default)
"SM" SIM phonebook
Read Command: +CPBS?
Read command returns currently selected memory, the number of used locations and total number of loca-
tions in the memory. Response is in the form:
+CPBS: <storage>,<used>,<total>
where <used> indicates the number of used locations and <total> shows the total capacity of <storage>.
Test Command: +CPBS=?
Test command returns supported storages.
4.24 +CPBW - Write phonebook entry
Exec Command: +CPBW=[<index>][,<number>[,<type>[<text>]]]
Execution command writes phonebook entry in location number <index> in the current phonebook memory
storage selected with +CPBS. Entry fields written are phone number <number> (of address type <type>) and
text <text> associated with the number. If those fields are omitted, phonebook entry is deleted. If <index> is
left out, but <number> is given, entry is written to the first free location in the phonebook. Both <text> and
<number> should be of string type enclosed by ““; for example, “John”,”1234”.
Test Command: +CPBW=?
Test command returns the location range supported by the current storage, the maximum length of <num-
ber> field, supported number formats of the storage, and the maximum length of <text> field. Response is in
form:
+CPBW: (list of supported <index>s),<nlength>,(list of supported
<type>s),<tlength>
4.25 +CPIN - Enter PIN
Set Command: +CPIN=<pin>[,<newpin>]
Set command sends to the phone a password which is necessary before it can be operated (SIM PIN, SIM
PUK, etc.). If no PIN request is pending, no action is taken by the phone.
If the PIN required is SIM PUK or SIM PUK2, the second pin is required. This second pin, <newpin>, is
used to replace the old pin in the SIM.
Both <pin> and <newpin> should be of string type enclosed by ““; for example,”1234”.
Read Command: +CPIN?
Read command returns an alphanumeric string indicating whether some password is required or not.
Response is in the form:
+CPIN: <code>