Specifications

February 23, 2000 Motorola Personal Communications Sector Page 25
Satellite Subscriber Products Division
Motorola Personal Communications Sector
Satellite Subscriber Products Division
ISU AT Command Reference Extended Cellular Commands (+C)
Read Command: +CNMI?
Read command returns the current settings for the SMS message indication. Response is in the form:
+CNMI: <mode>,<mt>,<bm>,<ds>,<bfr>
Test Command: +CNMI=?
Test command returns the supported settings of the phone. Response is in the form:
+CNMI: (list of supported <mode>s),(list of supported <mt>s),(list
of supported <bm>s),(list of supported <ds>s),(list of supported <bfr>s)
4.19 +COPS - Operator Select
Set Command: +COPS=[<mode>[,<format>[,<oper>]]]
Set command forces an attempt to manually register the phone to the network. Only the IRIDIUM as <oper>
is supported.
Valid values for the parameters are outlined below.
<mode>:
0 automatic (<oper> field is ignored) (default)
1 manual (<oper> field is optional)
<format>:
0 long format alphanumeric <oper>
1 short format alphanumeric <oper>
2 numeric <oper>
<oper>: string type enclosed by ““; <format> indicates if the format is alphanumeric or numeric; long alpha-
numeric format can be up to 16 characters long and short format up to 8 characters; numeric format is the
Location Area Identification number which consists of a three BCD digit country code plus a two BCD digit
network code; hence the number has structure: (country code digit 3)(country code digit 2)(country code
digit 1)(network code digit 2)(network code digit 1). Since IRIDIUM is the only operator, the short and long
format is “IRIDIUM” and the numeric format is “90130”. These are the only values accepted.
Note that setting the <mode> to manual does not disable automatic registration of the phone to the network.
It just forces a manual registration procedure when entered.
Read Command: +COPS?
Read command returns the current mode and the currently selected operator. If no operator is selected, <for-
mat> and <oper> are omitted. The response is in the form:
+COPS: <mode>[,<format>,<oper>]
Test Command: +COPS=?
Test command returns the list of operators present in the network. Response is in the form:
+COPS: list of supported (<stat>,long alphanumeric <oper>,short
alphanumeric <oper>,numeric <oper>)s
where <stat> indicates:
2 current
4.20 +CPAS - Phone Activity Status
Exec Command: +CPAS