Specifications

February 23, 2000 Motorola Personal Communications Sector Page 18
Satellite Subscriber Products Division
Motorola Personal Communications Sector
Satellite Subscriber Products Division
ISU AT Command Reference Extended Cellular Commands (+C)
4.9 +CLCK - Facility Lock
Exec Command: +CLCK=<fac>,<mode>[,<passwd>[,<class>]]
Execute command is used to lock, unlock or interrogate the phone pin codes or a network facility <fac>.
Password is normally needed to do such actions. The following parameter values are currently supported:
<fac>:
"CS" CNTRL (phone lock)
"SC" SIM (lock SIM card)
<mode>:
0 unlock (disable)
1 lock (enable)
<passwd>: string type, enclosed by “ “; for example, “1234”.
<class> is a sum of integers each representing a class of information (default 7 equals to all classes):
1 voice
2 data
4fax
The parameter <class> is not applicable to the ISU and therefore, does not affect phone operation.
Test Command: +CLCK=?
Test command returns the facility values supported by the phone. The response is in the form:
+CLCK: (list of supported <fac>s)
4.10 +CMEE - Report Mobile Equipment Error
Set Command: +CMEE=[<x>]
Set mobile equipment error reporting level.
<x> takes the following values:
0 Disable error reporting (use ERROR result code) (default).
1 Enable numeric error reporting.
2 Enable verbose error reporting.
An example of an error report is:
+CME ERROR: <y>
where <y> can be the number or text listed below:
0 phone failure
1 no connection to phone
2 phone-adaptor link reserved
3 operation not allowed
4 operation not supported
5 PH-SIM PIN required
6 PH-FSIM PIN required
7 PH-FSIM PUK required
10 SIM not inserted