Specifications

3 Using Wind River Trace

3.5 Using the Trace View

To collapse any column, click on the toggle button for that field. To re-expand it,

click on the toggle button again.

The Instruction column cannot be collapsed.

Toggle Trace/Source view Auto-Sync

Click this button to set the Workbench editor to align itself with any highlighted

instruction in the instruction field in the Trace view. With this button toggled,

clicking on a function in the Trace view will cause the editor to jump to that

function. To un-sync the Trace view and the editor, click the button again.

Clear Trace Buffer

Clear the trace buffer so that previously stored trace data is not included in the next

trace that appears. Whenever you add new code, or manually alter the Program

Counter value, you should clear the trace buffer before running or stepping, to

prevent errors from occurring due to old trace data in the buffer. The button can

also be used to trace individual functions by clearing the buffer and then stepping

over the function.

The button does not actually flush the trace buffer; it just moves the pointer to the