Specifications

Wind River Trace for Wind River Workbench
Hardware Reference, 3.0
40
cf set_vbr value
value is the exception table base address, which needs to be configured in
RAM so that the debug exception handler address, which is defined in the
Set Work Space option in Step a, can be entered in the exception table.
For example, entering the command
>BKM>cf set_vbr 20000000
will set the Vector Base Register to 20000000 whenever an IN command is
issued.
4. Reset the target to make your changes take effect:
>BKM>in
3.4 Setting Up a Project
Several example projects are included in Wind River Workbench for
demonstration purposes. To open a new demonstration project, use the following
steps:
1. In the Workbench toolbar, select File > New > Project.
The New Project wizard appears.