Specifications

Wind River Trace for Wind River Workbench
Hardware Reference, 3.0
34
■
Normally, when you disconnect a target connection, the target server (and
simulator) are killed because they are no longer needed. In a connection that is
flagged as Shared, however, they are left running so that other users can
connect to them. In other words, you can flag a connection as shared if you
want to keep the target server (and simulator) running after you disconnect or
exit Workbench.
17. Click Finish.
The target name (in this case, WRICE_MCF5485) appears in the Remote
Systems view.
The Disassembly view opens and a
>BKM> prompt appears in the OCD
Command Shell. You have successfully entered Background Mode.
3.3 Configuration Settings
Some Wind River ICE SX configuration options must be changed in order for the
Wind River Trace to trace correctly.
For a description of all Trace-specific CF options, see 3.3.1 Configuration Options for
Tra ce , p.34. For the procedure for setting CF Options, see 3.3.2 Setting Configuration
Options, p.36.
3.3.1 Configuration Options for Trace
AMCC 405, 440, and Freescale ColdFire Processors:
Clear Trace Buffer on GO (TRCCLR)
The TRCCLR parameter is used to control where to start saving trace data in the
trace memory on a
GO command. The trace clear settings YES and NO determine
where to start saving the trace data in the trace memory, as explained below.
■
YES — When a GO command is issued, the trace data will be stored in trace
memory starting at the first trace memory location. All previously stored trace
data will be overwritten and lost. All newly captured trace data will be stored
starting at the beginning of the trace memory.