Specifications

Wind River Trace for Wind River Workbench
Hardware Reference, 3.0
20
The Emulator Settings dialog appears.
4. In the Designators area, enter your target processor type in the Processor field,
or click Select to choose from a list of available processor types.
If you are using multiple processors, or if you have other devices besides your
processor on your JTAG scan chain, you must specify a board file in the Board
File field. Check the Board File radio button and click Browse to navigate to
your board file.
Either choice will populate the field below the Board File field with a
summary description of your board.
5. In the Communications area, fill in the IP Address field with the IP address
you have assigned to your ICE unit.
This example shows the Emulator Settings dialog with values entered for a
ColdFire MCF5485 target processor.