Specifications

3 Using Wind River Trace
3.2 Establishing Communications
19
3
The Communication Settings dialog appears.
To configure communication settings manually, see Configuring
Communication Settings Manually, p.19. To configure communication settings
through a serial port, see Configuring Communication Settings Manually, p.19.
Configuring Communication Settings Manually
3. Check the Specify all communication settings manually box and click Next.
NOTE: If you choose this option you will need to know either the network name
of the emulator or its IP address. For information on assigning these values, see the
Wind River ICE SX for Wind River Workbench Hardware Reference.