Specifications

2 Hardware Setup
2.4 Wind River Trace with Wind River ICE SX
13
2
4. Press both thumbs on each side of the connector, and snap the Wind River
Trace into place.
When inserting, press down on both sides of the connector with equal force.
When the Trace unit is properly inserted, it snaps into place and is solidly
attached to the cable.
A 4xx/44x or ColdFire filtered trace cable is shipped already attached to the
Wind River Trace unit.
2.4.1 Applying Power to Wind River Trace and Wind River ICE SX
The Wind River Trace unit includes a dedicated 5V power supply that should be
mated with a power cord appropriate for the area. For Wind River specified part
numbers, see Table 2-2. The Wind River ICE SX unit includes a standard, 5-pin
circular DIN connector power supply that converts standard 110-240 VAC 50/60
Hz to 5V DC at 5A. The DC input connection is located on the back of the
Wind River ICE SX unit. For more information, see Table 2-2.
!
WARNING: To avoid electrical shock and possible loss of life, do not disassemble
the power supply. The power supply contains no user serviceable parts and should
not be disassembled.