Specifications

1 Overview
1.4 Safety Information
5
1
The Wind River ICE SX utilizes On-Chip Debugging (OCD) services embedded in
the target microprocessor (BDM/JTAG/EJTAG). These OCD services are a set of
debugging services that reside in the chip’s micro-code. When accessed, they
provide complete control of the target microprocessor.
There is no hardware or software intrusion into the system, and these debug
services do not require any target interrupts, RAM, ROM, or RS-232
communications. All interaction between the Wind River ICE SX and the
processor runs exclusively through the OCD link. The result is that the tools are
effective for the entire development process, even before board-level peripherals
are stable.
1.4 Safety Information
There are some basic safety precautions that should be observed when using your
Wind River Trace. Following these precautions will help you to avoid injury and
prevent damage to the tools and/or any products connected to them. To avoid any
hazardous conditions, use this product only as specified. For the purposes of this
manual, Warning and Caution symbols are used to mean the following:
Precautions to avoid Injury
!
WARNING: Warning statements indicate conditions that could result in injury or
loss of life and describe how to avoid them.
!
CAUTION: Caution statements indicate conditions that could result in damage to
this product or other property and describe how to avoid them.
!
WARNING: Do not operate in wet or damp environments or outside of the
recommended operating conditions. This product is intended for indoor use only.
Only use the power cord specified for this product with a properly grounded
power outlet.
Do not operate this product in an explosive atmosphere.
Do not operate the product if damaged. Have a qualified service person inspect
damaged equipment before use.